CertBox
Plumbers Create in CertBox

Backflow Prevention Test Certificate

The Australian Backflow Prevention Test Certificate documents the annual testing of backflow prevention devices protecting the drinking water supply from contamination. Backflow prevention is a critical public health requirement mandated by AS/NZS 3500.1 and enforced by water authorities and councils across Australia. All testable backflow prevention devices must be tested annually by a licensed backflow prevention tester and the certificate submitted to the relevant water authority.

AS/NZS 3500.1:2021 (Water Services), state water authority backflow prevention requirements, local council annual testing mandatesValid: Annual (12 months)

No credit card required. Set up in 30 seconds.

Sample Backflow Test Certificate certificate

Sample Backflow Prevention Test Certificate certificate created with CertBox, showing the professional PDF layout with property address, client details, and water authority reference, each backflow device: type, make, model, serial number, and location, hazard level classification of the water use

Sample Backflow Test Certificate with fictional data. All personal details shown are fake.

What it covers

  • Property address, client details, and water authority reference
  • Each backflow device: type, make, model, serial number, and location
  • Hazard level classification of the water use
  • Test results: upstream and downstream pressure readings, valve operation
  • Pass / fail outcome and any remedial action required
  • Next test due date
  • Tester backflow licence number and signature

Who needs a Backflow Test Certificate?

Licensed backflow prevention testers
Commercial and industrial premises with testable devices
Irrigation system operators
Hospitals, food processing sites, and high-hazard properties
Strata and body corporate managers

Create your Backflow Test Certificate with CertBox

1

Fill in the form

Pick Backflow Test Certificate from the list, fill in the fields on your phone.

2

Compliance checks run

Built-in validation catches missing fields and out-of-range readings.

3

PDF generated instantly

Professional PDF ready to share via secure link or download.

Frequently asked questions about Backflow Test Certificate

Why is annual backflow testing required in Australia?
Backflow prevention devices stop contaminated water from flowing back into the drinking water supply. AS/NZS 3500.1 and water authority requirements mandate annual testing because backflow devices can fail over time due to debris, wear, or water pressure fluctuations. An untested device may not provide protection when it is most needed.
Who can test backflow prevention devices in Australia?
Backflow device testing must be carried out by a licensed plumber who holds a specific backflow prevention testing endorsement on their licence. Not all plumbers hold this endorsement — check that your contractor is appropriately licenced before engaging them.
What happens if a backflow device fails the test?
If a device fails, it must be repaired or replaced immediately. The water authority must be notified of a failed device, and a re-test certificate must be submitted once the device has been repaired and confirmed as operational. Failure to act on a failed device can result in enforcement action by the water authority.

Related certificates

Plumbers

Plumbing Compliance Certificate

Create plumbing compliance certificates for Australia. AS/NZS 3500 compliant, covers hot water, drainage, and general plumbing installations.

Plumbers

TMV Certificate

Create TMV commissioning certificates for Australian plumbing. AS 4032.1 compliant, records set temperature, pressures, and outlet test results.

Ready to create your Backflow Test Certificate?

Free forever. Set up in 30 seconds, no card required.

No credit cardCancel anytimeSet up in 30 seconds

Create your Backflow Test Certificate in minutes