Electricians Create in CertBox

Minor Works Record (2 or 3 Existing Circuits)

Your first certificate is free. Then £4.99 each, or £14.99 a month for as many as you like.

Sample Minor Works Record (2-3 Circuits) certificate

Sample Minor Works Record (2 or 3 Existing Circuits) certificate created with CertBox, showing the professional PDF layout with circuit details for 2 or 3 existing circuits, protective device type and rating per circuit, cable type and size per circuit

Sample Minor Works Record (2-3 Circuits) with fictional data. All personal details shown are fake.

A Minor Works Record keeps the details and test results of minor works on 2 or 3 existing circuits in one document: circuit details, protective devices, cables, continuity, insulation resistance, earth fault loop impedance and RCD tests. It is your own record, not the BS 7671 Minor Works Certificate. That certificate covers one existing circuit, so for the certificate you issue a Minor Works Certificate for each circuit or one Electrical Installation Certificate.

BS 7671:2018+A4:2026Valid: One-off (for the specific work)

What it covers

  • Circuit details for 2 or 3 existing circuits
  • Protective device type and rating per circuit
  • Cable type and size per circuit
  • Test results: R1+R2, IR, Zs, RCD per circuit
  • Earthing arrangements
  • Confirmation that no new circuit was installed

Who needs a Minor Works Record (2-3 Circuits)?

Electricians
Domestic installers
Part P registered contractors

Create your Minor Works Record (2-3 Circuits) with CertBox

1

Fill in the form

Pick Minor Works Record (2-3 Circuits) from the list, fill in the fields on your phone.

2

Send the PDF

Download it, email it to your customer or share a link. Your first one is free to send.

Frequently asked questions about Minor Works Record (2-3 Circuits)

Which certificate do I issue for work on more than one circuit?
The IET says a separate Minor Works Certificate for each existing circuit you worked on, or one Electrical Installation Certificate (EIC) covering all of it. Any new circuit needs an EIC. This record keeps the details of all the circuits in one place, alongside those certificates.
What test results are needed per circuit?
For each circuit: continuity of protective conductors (R1+R2), insulation resistance (minimum 1 MOhm), earth fault loop impedance (Zs, must be within values for the protective device), and RCD operation time if applicable.

Ready to create your Minor Works Record (2-3 Circuits)?

Your first certificate is free. Then £4.99 each, or £14.99 a month for as many as you like.

No card to sign upSet up in 30 seconds

First certificate free